Products / KeeGuard

KeeGuard

Fritstående tagkantsikringssystem

Et fritstående kantsikringsmodulsystem der ikke gennemtrænger tagets membran.

For mere information kontakt os her:

Send besked

Sikkert miljø for alle der arbejder på et tag

En af HSEs anbefalinger omkring reduktion af risiko for mennesker der arbejder på et tag er at vælge og benytte det rigtige sikkerhedsudstyr til arbejde på tage. For kontrahenter og montører, der skal op på flade tage for at udføre væsentligt bygge-, reparations- og vedligholdelsesarbejde, kan sikkerhedsrækværker, der hidrører fra kollektivt tagkantssikringssystemer, gøre en stor forskel, når det gælder om at minimere faren. Det valgte kollektive system skal overholde de højeste sikkerhedsstandarder. Vores KeeGuard® tagrækværkssystem er fuldtud testet og overholder eller er bedre end de gældende tagsikkerhedskrav. Ikke alle fritstående tagkantsikringssystemer er op til dette sikkerhedsniveau for tagområder.

KeeGuard® er et fritstående kantsikringsmodulsystem der ikke gennemtrænger tagets membran. Systemet fungerer iht. et afprøvet kontravægtsystem, og genindvundne PVC-vægte giver en basis af høj visibilitet og sikkerhed mod at glide, og det gennemtrænger ikke tagets membran. Galvaniserede fittings og rør yder kollektiv sikring i arbejdsmiljøet for alle der arbejder på et tag.

KeeGuard®-tagkantsikringssystemet giver maksimal fleksibilitet for de fleste tagkonfigurationer, næsten ethvert fladt tag og top til 10 grader kan klares. Systemet fås til forskellige tagtyper, enten til anvendelse, hvor der er en tilbageholdelsesvæg, såsom et rækværk, eller hvor taget er helt åbent omkring perimeteren. KeeGuard®-tagrækværkssystemet kan også bruges til retro-montering på ældre bygninger ligesom på nye konstruktioner.

KeeGuard®-systemerne fås også i en letvægts-aluminiumsversion.

En nyhed er en KeeGuard® Foldshield-foldbar version samt et unikt, fast tagkantsikringssystem ved navn KeeGuard® Topfix, specielt designet til metaltage med stående fals.

Et enkelt og økonomisk tagkantsikringssystem

  • Yder kollektiv sikring for alle der arbejder på et tag
  • Fungerer iflg. et afprøvet kontravægtssystem
  • Ingen gennemtrængning af tagmembranen
  • Minimalt antal komponenter giver nem montering
  • Unik fitting af den åbne type tillader hurtig installation af horisontale lister
  • Ingen svejsning, gevindskæring eller isætning af bolte på stedet
  • Velegnet til brug på beton, asfalt, PVC-membran og filttagflader.
  • Moduldesignet gør det muligt at rekonfigurere på stedet efter behov
  • Sektioner kan tilføjes eller tages ned for genopførelse andetsteds
  • Kompatibelt med næsten alle konfigurationer af flade tage, op til 10 graders hældning

Vi sætter standarderne for sikkerhed på tage

  • EN ISO 14122 del 3
  • EN 13374 klasse A
  • HSG-33 Sundhed & sikkerhed ved tagarbejde
  • HSE INDG 284 “Working on roofs”
  • BS 6399: del 2 1995 Vindkode

Design- & installationsservice

Kee Safety tilbyder komplet design- og installationsservice. Vi påtager os gerne inspektioner og udfærdigelse af CAD-tegninger til dit projekt. Hvis du er interesseret i vores tjenesteydelser, bedes du kontakte os.

  • Teknisk rådgivning og -support
  • Inspektionstjeneste på stedet
  • Design-løsninger i CAD
  • Installationsservice

Send besked

Suggested Specification for KEEGUARD ROOF EDGE GUARDRAIL SYSTEM

PART l - GENERAL

Summary: Provide and install freestanding KeeGuard® Roof Edge Fall Protection System, including tube railings, bases, counterweights, fittings and delivery to site.

Reference: EN14122 Part 3 & EN13374 Class A, all applicable, local and national codes.

Finish:

  1. Tube for handrails, mid-rails, uprights and counterweight connection is to be galvanised mill finished to the requirements of EN ISO 1461.
  2. Kee Klamp® Components shall be galvanised to meet EN ISO 1461.

Design Requirements:

  1. Railing shall consist of top rails, mid rails, uprights, counterweights and connections.
  2. All tube connections to be Kee Klamp® structural tube components manufactured to the requirements of EN1562/1563.
  3. Railing assembly shall be capable of withstanding a load of 300 N/m applied at any point on the top rail. Test in accordance with EN 14122 part 3.

Submittals:

  1. Shop drawing; Indicate profiles, sizes, connections, size and type of fastners and accessories.

Filed Measurements:

  1. Verify field measurements prior to assembly and/or ordering.

PART ll PRODUCTS

Manufacturer: Kee Safety Ltd, Cradley Business Park, Overend Road, Cradley Heath, West Midlands B64 7DW, England. Tel: +44 (0) 1384 632 188, Fax +44 (0) 1384 632 192. www.keesafety.co.uk

Componenets:

  1. Tube: EN39 & EN10255.
  2. Rails and Posts: 48.3 OD steel tube, galvanised.
  3. Kee Klamp components: Elbows, Crossovers, Wall flanges, Tees, Couplings, galvanised.
  4. Mounting Bases: Iron bases are galvanised and are supplied with a rubber pad on underside of the component.
  5. Counterweights: Moulded recycled PVC.
  6. Fasteners: All fasteners shall be stainless steel.

PART lll EXECUTION

Installation:

  1. For all connections with Kee Klamp® Components, each set screw is to be tightened to 39 N/m of torque.
  2. Placement of uprights and counterweights to manufacturer specifications as stated in the KeeGuard® Installation Instructions.
  3. Terminate the run as stated in the KeeGuard® Installation Instructions.

Schedules:

  1. Freestanding counterweighted guardrail system with 1.1m nominal height to provide a barrier on the roof which withstands a load of 300 N/m applied to the top rail per EN 14122 Part 3.

Acceptable low slope, roof edge fall protection to be KeeGuard® manufactured by Kee Safety Ltd.

Roof walkway with guard rail

Taggangbro med sikkerhedsliste

+

General Questions

Are toeboards available on the KeeGuard system?
Yes, a toeboard can be supplied at the customer’s request.
Can KeeGuard be used as an anchor?
The KeeGuard system is not intended as an anchor and cannot be used as an anchor or tie off point to support any workers or equipment suspended off the roof.
Can the KeeGuard system be painted?
KeeGuard components can be painted by the customer before or after installation. KeeGuard components are also available powder coated in any RAL color at the customer’s request (extra charges apply for powder coating). Powder coating takes place prior to shipment.
Can the KeeGuard system be used to protect snow removal workers on rooftops in cold climates?
The design of the system allows for protection of the worker while allowing snow to be shoveled over the mid rail and off the roof.
Does KeeGuard need to be inspected or maintained after installation?
Once properly installed, the KeeGuard system is considered a permanent installation. We recommend that any fall protection system be inspected on a routine basis for maximum liability protection for the building owner.
Does the KeeGuard system comply with the current UK safety regulations?
The KeeGuard system has been tested to comply with all EU norms.
Does the KeeGuard system offer advantages over a horizontal life line system or harness system?
Yes. KeeGuard Roof Edge Fall Protection Railing System is a passive, collective fall protection system which is preferred by safety consultants. Lives have been lost in work related falls resulting from workers not using harnesses properly. The KeeGuard system removes the potential of that risk. Harness systems require training and proper and regular use. The embedded anchor for a harness system could later leak and cause costly water damage. The worry of not enough harnesses for rooftop workers is eliminated.
How do I buy the KeeGuard system?
Each KeeGuard System is individually engineered for your premises. For further information, call 01384 632 188 to speak to our KeeGuard sales desk.
How does the KeeGuard system stay on the roof if it isn’t bolted through the roof membrane?
The system employs a tested and proven counterbalance system, the KeeGuard system(Patents in effect) is a roof edge railing fall protection system that keeps the workers on the roof without endangering the roof membrane itself.
How long does it take to install KeeGuard? Are special skills or tools required?
With the use of the new KeeGuard open style fitting (standard), two workers with minimal experience and simple hand tools can be installed up to twice as fast as most other systems. All materials should be delivered to the rooftop using a hoist, crane or other mechanical method. No power tools are required.
Is KeeGuard intended for temporary or permanent installation?
The system is intended as a permanent fall protection solution, however since it is a modular system, the system can be disassembled and moved if needed or for maintenance tasks.
Is KeeGuard more expensive than using a Harness/Tie Off system?
The installed cost of KeeGuard is competitive with horizontal life line systems.
Will installation of KeeGuard reduce insurance premiums?
Insurance premiums are often impacted by steps taken by the building owner to reduce hazards to their workers. More importantly, building owners’ liability will be strictly examined if an industrial accident occurs and preventative measures (such as KeeGuard) were not taken.

Installation Questions

Are all the materials used in the KeeGuard system protected from corrosion?
Galvanised, tube is used for vertical, horizontal and counterbalance supports and Kee Klamp components are all galvanized at our factory. The grub screws used to assemble the components and pipes together are all protected by Kee Koat® which is a special corrosion resistant coating. KeeGuard fall protection system is engineered using special components and is designed to withstand a full range of outdoor conditions.

Technical Questions

Can the KeeGuard system be installed on a sloped roof?
The system can be used on any style of flat roof with a slope up to 10 degrees.

Catalogue Items