Sikkerhedsløsningen til maskinerede livliner
Et tov-baseret livlinesystem der udgør faldstandsning / -tilbageholdelsessikring ved arbejde i højden.
KeeLine faldsikringssystem
KEE LINE-livlinesystemet yder faldstandsning / -tilbageholdelsessikring, hvor sikkerhedsrækværker ikke kan passes ind, eller hvor der ved planlægningen kræves en praktisk talt usynlig faldsikringsløsning. Et tov-baseret, horisontalt livlinesystem udgør en fleksibel, økonomisk løsning til beskyttelse af arbejdere i højden.
KEELINE yder komplet og kontinuerlig ”håndfri” beskyttelse for op til tre brugere, når det bruges som faldstandsningssystem.
Certificering
KEELINE-systemet overholder kravene i EN 795:2012, CEN TS 16415:2013, ANSI Z359 and CSA Z259 fuldtud, og har været underkastet omfattende afprøvning på forskellige tage-typer, med fuld godkendelse fra tredjeparts side. Afprøving på tagstruktur har været overværet af Decra.
KEELINE livlinesystem
KEELINE-vandret livlinesystem er konstrueret til at give sikker adgang til alle områder af taget, ved at arbejderne er permanent forbundet til linen og kan bevæge sig frit omkring på tagfladen. KEELINE-systemet anvender stålwirer, 8 mm, 316 rustfrit stål, og tager højde for afstande på op til 12 m mellem poster.
Systemet er designet på den måde, at løberen, der forbinder brugeren med systemet, simpelthen glider hen over beslag, så det ikke er nødvendigt at afmontere beslaget fra livlinen.
KEELINE inkorporerer desuden et progressivt stødabsorberingssystem. Hvis brugeren falder, går støddæmperne, mellemliggende beslag og de understøttende poster i funktion og deformeres, så belastningerne, der pålægges bygningens struktur, reduceres til under 10 Kn.
Løsning til alle typer tage
KEELINE-systemet er testet og kan installeres på en række tagtyper, f.eks. asfalt-membrantage, tage med stående fals og metalprofiltage, hvor der anvendes enten "Top fix"- eller ”Through fix”-ankre POSTANKA, hvor montering på hovedbygningens struktur foretrækkes.
Den horisontale KEELINE-livline kan monteres på ethvert stålbeklædt panel, enhver liste-/søjlestruktur, solide rækværksvægge og flade tage vha. en støtte-post. Når en livline ikke kan monteres gennem tagets struktur, kan der leveres et frit-stående faldstandsnings- / tilbageholdelsessystem ua. af KEE ANCHOR-tagankre. En række dødvægtsankre kan forbindes med ca. 10 m’s mellemrum vha. den horisontale KEELINE-livlilne.
KEELINE fås til montering direkte på beton, stål, mursten eller murværk i enten horisontal eller overliggende anvendelse.
Kendetegn for Keeline livlinesystemet
- Personlig faldsikringssystem designet til taginstallation og horisontal eller overliggende anvendelse
- Afprøvet på mange tagtyper
- Maksimal spændvidde mellem poster 12 m
- Løberen kan passere over hele systemets længde uden at skulle kobles fra på noget tidspunkt.
- Post af den åbne type med lav profil, der er konstrueret til at passe til tage med metalprofil eller med stående fals
- Specifik sokkelplade og poster til membrantag udgør en enkel rusttræg installation
- Galvaniserede dele af ulegeret stål eller rustfrit stål
- Bundplader kan fastgøres på flere måder
- Overholder EN 795 2012
Fordele ved Keeline-livlinesystemet
- Afprøvet faldsikringssystem der overholder alle gældende lovkrav
- Sikkerhedsgaranti for, at systemet er fuldt funktionsdygtigt på alle godkendte overflader
- Minimerer antallet af poster og nødvendige tagbefæstelser
- Brugeren er altid forbundet til systemet
- Poster konstrueret til at gå i funktion og deformere i tilfælde af et fald, for således at minimere belastningen, der påføres bygningen, til under 10 kN
- Sparer monteringstid og reducerer således projektomkostningerne
- Langvarig korrosionsbestandighed
Kontakt os gerne hvis du har nogle spørgsmål eller for en gratis sikkerhedsgennemgang.
For Roofs
KeeLine for Roofs
KEELINE is a wire-based horizontal lifeline system that has been designed to provide continuous fall protection. Fit for use in areas where guardrails are not suitable, the system allows roofers and contractors to safely work on the roof and provides a virtually invisible solution to carry out repairs, maintenance or inspection work. Installed as a permanent lifeline system, it offers uninterrupted access for up to three users across the whole roof, allowing them to freely move around the surface.
The KEELINE system is suitable for all modern roof types, including bitumen membrane roofs, as well as metal profile, standing seam and composite panel roofs.
KEELINE has been tested to EN795 Class C Personal fall protection equipment – Anchor devices.
Typical KEELINE Lifeline System Layout
The drawing below presents typical KEELINE system layout and fixing details, depending on a type of the roof.
For Structures
KeeLine for Structures
The KEELINE lifeline system for Structures provides the horizontal lifeline components to allow mounting directly to concrete, steel, brick or stonework either in the horizontal or overhead application.
- 8mm dia horizontal life line system for fixing directly to suitable Steel, Concrete, Brick or Stone structures
- Primary components connecting to the cable are fabricated from 316 Grade Stainless Steel
- Up to 3 users
- Patented in-line shock absorber limits end loads to less than 10 kN
- Corner and intermediates bracket options allows system to follow structures shape
- Up to 12m spans between supports
- Removable Traveller easily passes corners and intermediate brackets for continuous protection and enables users to detach or re-attach at any point of the system
- Conforms with EN 795 Class C
For Postanka
The Kee Safety's POSTANKA anchors range offers an alternative fixing method for example when the roof structure is unsuitable for KEELINE Top Fix anchors. Our POSTANKA range of fabricated, hot dip galvanised anchors are designed using a standard calculation program to the requirements of EN795 Class 2.
POSTANKA posts are used where is preferable to mount directly to a building structure, e.g. on traditional sloping roofs or onto concrete roof decks, e.g. on green roofs.
POSTANKA anchors are available in standard sizes but are more typically designed to suit customer’s specific application.
The video below presents our POSTANKA anchor used with the KEELINE lifeline system.
POSTANKA anchors are available in two styles.
Type 3 Postanka
Designed to clamp around either suitable wooden or steel beams and features a solid adjustable height pedestal.
Type 6 Postanka
A solid central pedestal welded to a 15mm thick base plate. Available with multiple fixing options.
As the POSTANKA range can be designed to suit a particular application, anchors can be produced for mounting other products for example KEE WALK or solar panels.
Overhead
KeeLine Overhead
KEELINE Overhead provides personal fall protection, either fall arrest or restraint, for up to three users. Used where it is beneficial to have the life line system mounted directly above the user including vehicle loading, machine maintenance and access, building maintenance and cleaning and overhead crane access.
A KEELINE Overhead features a permanently attached two wheeled traveller which passes smoothly over the intermediate brackets, even when the user is attached to a fully extended inertia reel.
The system can be configured to allow single or multiple spans of up to 30m in between supports and is designed with a higher pre-tension than the standard KEELINE system to reduce line sag and cable deflection. The system’s in-line shock absorber minimises the end loads back to the supporting structure.
A grade 316 stainless steel wire and electro-polished components ensure a low maintenance and durable system.
Features and Benefits of the KEELINE Overhead System
- Higher pre-tension than standard KEELINE systems reduces sag and cable deflection
- Independently tested by Satra to the requirements of EN795 Type C
- Overhead fall protection for up to three users
- Durable electro-polished grade 316 stainless steel brackets and traveller
- Meets the requirements of international standards
- Permanently attached, grade 316 stainless steel, smooth running two wheeled traveller easily passes intermediate brackets
- KEELINE in-line shock absorber limits end loads to structure
- Suitable for single or multiple span systems
- Spans up to 30m in between supports
- End and intermediate brackets are installed directly to suitable structures, including steel or concrete